Leather Care
- USES
- Mitigate the risk of contagion from diseases caused by viruses, especially COVID-19.
- PACKING
- -
- DESCRIPTION
- The Disinfecting process provides instant protection against Covid-19 and other viruses by spraying the disinfectant liquid through the nozzles placed on different sides of the cabin. With the 15 seconds disinfection process at the entrance to the facilities, the entire body surface is disinfected, and a maximum hygiene level is obtained.
- FEATURES
- - The movement of the disinfected person are detected with the motion sensors to save the disinfection liquid.
-
1Strip floors to remove old waxes, sealers and finishes -
2 Rinse thoroughly and let dry -
3With clean equipment apply thin, even coats of finish -
4Under normal conditions, allow to dry for 60 minutes between coats -
5For best results, apply a maximum of 4 coats in 24 hours -
6* After finish work, wash equipment and dry -
7* Always use a clean mop -
8* Do not use for uncoated wood floors -
9* Test a small and inconspicuous area before applying to the entire area
-
1 Do not swallow. If so, contact a doctor -
2 Do not use for the other use -
3 In case of contact eyes or skin, wash immediately with plenty of water and seek medical advice -
4 In case of eyes and skin irritation, stop using and seek medical advice -
5 Wear appropriate personal protective equipment, avoid direct contact with skin -
6 Wash your hands and foots after application -
7 Keep away freezing -
8 For professional use only